This professional 10″ tile saw kit from Gundlach is designed to give the best possible cuts and productivity on tile and stone. With a 115 volt, 15 amp, 1 1/2hp belt-driven motor this saw is built for daily use. This saw will rip a 20″ tile and diagonally cut a 14″ tile and has a 3 1/2″ maximum depth of cut. The saw comes with a small miter guide, an adjustable rip guide for 45 and 90 degree cuts, three premium blades, and a rolling stand. 
 
Saw features:
20″ Straight Cut & 14″ Diagonal Cut
A large cutting table mounted on ball bearing rollers with an injection molded rubber top to reduce vibration and securely hold tile in place for accurate cuts
A rubber topped cutting table with slots molded on a 45° angle to act as diagonal cutting guides and also channel water back to the tray
The last 1” of the rubber top molded solid up to the tile backstop to eliminate end-of-cut corner breaking caused by insufficient tile support
A removable tile backstop that facilitates freehand cutting of oversize material
Cutting table that can be secured by a spring loaded lock to prevent loss during transport
A powerful 1-1/2 HP motor that has a patented cooling inlet that draws air away from the side opposite the cutting mist to give longest motor life
Thermal overload protection, and a water pump plug receptacle
Liquid Cooled Bearing Housing (LCBH), a patented design that directs blade cooling water through the bearing housing to prevent overheating of the blade shaft bearings
Fully guarded belt driven blade shaft that is adjustable for cutting height
Removable blade guard with cooling water directed to both sides of the blade through brushes that provide even distribution of water and reduce cutting mist and a molded rubber splash guard
Steel construction with zinc plated angle rails and a powder coated frame
C-UL Listed motor and water pump
No. 1000-SW Saw Stand is included.
 
Additional features:
A 14-1/2″ x 14-1/2″ cutting table
Scale (tile backstop) marked with 1/4″ graduations to 8″ on the left side and 6″ on the right side
Plastic water tray has a chained rubber drain plug and a two year warranty against breakage in normal use
Included items: Water pump, Wrench, Owner’s manual, No. 1000-35 45°/90° Flat Cutting Guide, No. 700-34 45°/60° Small Miter Guide and No. 10-CRS 10″ Continuous Rim Standard Blade